Filter
Top Products
PAGE 8 / 9
3) Press and hold the “Vol-“ button on your BLUETREK
®
Skin headset for approx. 3
seconds, until the purple indicator light is on. (A beep can be heard in the
speaker).
4) - If the number is correct and have stored in the headset, you will hear:
1 beep in the speaker and the blue indicator light will flash once if the number has
been stored in position 1.
OR
2 beeps in the speaker and the blue indicator light will flash twice if the number has
been stored in position 2.
- If the number is incorrect, it will not store in the headset. You will hear a long low-
tone beep in the speaker and the red indicator light will flash twice.
Note:
1. Only 1 telephone number can be stored at one time. To store the second
number, simply repeat from Step 2.
2. Maximum of 2 favourite numbers can be stored and can be replaced by
repeating the above steps.
3. Remember to change back your mobile phone name once you have stored the
numbers.
Making a call to one of the stored numbers
1) Ensure your BLUETREK
®
Skin headset is paired and connected with your phone.
2) Press and hold the “Vol +” button on your BLUETREK
®
Skin headset until you
hear:
- 1 beep to call your number stored in position 1;
- 2 beeps to call your number stored in position 2.
Call waiting
When you hear a call waiting alert while you are on a call, press approx. 3 seconds on
the TALK button to accept the second call and place the current call on hold.
To switch between an active call and a hold call, press approx. 3 seconds on the TALK
button.
To end the active call and take the hold call, press once on the TALK button.
This function may not be available on some phones.
Additional features with some phones
Rejecting a call
When the headset rings, press the TALK button for about 2 seconds.
Redial the last number
When there is no incoming or active call, press the TALK button for about 2 seconds
until you hear a beep.