Filter
Top Products
Here is a typical preamplifier to amplifier setup:
OUTPUTS
Five way binding posts are provided. There is one pair provided for each channel. They
are designed to accept a banana-type plug, spade-lug connector (shown below), terminal
posts, and bare wire, and they are color coded for easy identification. The positive (+)
post should always be connected to the speakers (+) jack. The negative (-) post should
always be connected to the speakers (-) jack.
Spade connector Banana jack
Here is a typical amplifier output setup:
Page 6
P/N 13009 Rev.0102
R
From Front
Right Output
From Front
Left Output
L
SR
From Rear
Right Output
SL
From Rear
Left Output
C
From Center
Output
From Surr
Back Right
Output
SBL
SBL
From Surr
Back Left
Output