B&K series II Stereo Amplifier User Manual


 
REFERENCE 7270 SERIES II SPECIFICATIONS
Power rating: 8 ohms 200 watts @ 1 kHz
4 ohms 375 watts @ 1 kHz
Frequency response 5 Hz - 45 kHz
Input sensitivity 1.4 Volts
THD (S+N) 0.09 % @ 1 kHz
Input impedance 33.2 k ohms
Damping factor 450
Current (peak to peak) 75 Amps
Slew rate 14 V / µsec
Dynamic headroom 1.2 dB
S/N (A-weighted) 95 dB
Voltage gain 28
Line voltage 120/220/240 VAC switchable
Dimensions (O.A.) 17"(w) X 19.25"(d) X 7.25"(h)
Weight 78 lbs. max.
Power consumption 1830 watts max
17.5 Amps max current draw
130 watts @ no input
Replacement fuses Line -15 Amp/250 Volt Slow Blow
Rails - 6 Amp/250 Volt T-Lag
Speaker - 6 Amp/250 Volt T-Lag
In-rush - 2 Amp/250 Volt Slow Blow
Control - 0.5 Amp/250 Volt Fast Blow
Page 11
P/N 13009 Rev.0102