B&K 200.1 S2 Stereo Amplifier User Manual


 
REFERENCE 200.1 S2 Monoblock & REFERENCE 200.2 S2
*AV - Amplified Voltage
Power Rating: 8200.1 / 200.2
Power Rating: 4200.1 / 200.2
250 watts / 225 watts
450 watts / 375 watts
Number of Channels 1 / 2
Current (peak to peak) 150 Amps / 75 Amps
Dynamic Headroom 1.4 dB / 1.2 dB
Total Harmonic Distortion (THD) 0.09 %
Signal to Noise (S/N) 95 dB
Input Impedance
33.2 k
Damping Factor (50 Hz) 750 / 450
Frequency Response 5 Hz - 45 kHz
Slew Rate
14 V /
µ
sec
Input Sensitivity RCA Unbalanced 1.4 Volt
Input Sensitivity XLR Balanced 2.8 Volts | Pin 1 = Gnd, Pin 2 = In +, Pin 3 = In -
Gain 28.3AV* or 28dB
AC Line Voltage 120 / 220 / 240 VAC (optional / switchable)
Level Controls No
Binding Post Maximum Wire Gauge 4 AWG
Balanced Inputs Yes
Control Input 5 - 24 VDC
Control Output 10 - 12VDC 200mA
Dimensions in Inches Width
(Cutout Dimensions) Height
Depth
17.00 (17.12)
5.78 (5.90)
15.63 (16.75)
Shipping Weight 42 lbs.
Power Consumption
875 watts max
9 Amps max current draw
75 watts @ no input
Replacement Fuses
AC Line - 12 Amp / 250 Volt Slow Blow
Rails: 200.1 - 12 Amp / 250V Slow Blow
200.2 - 6 Amp / 250V Time-Lag
Speakers - 6 Amp / 250 Volt Slow Blow
SPECIFICATIONS