B&K AVR212 Stereo Receiver User Manual


 
47
ADJUSTING THE VOLUME
From Remote From Front Panel
Action
VOLUME or VOLUME
VOLUME KNOB adjust volume
MUTE can’t do from front panel instant volume all the way down
press MUTE again to restore
Note: The front panel VOLUME KNOB is used to control multiple functions and, therefore, cannot always control
the volume. The VOLUME KNOB may control volume in the menu system when not used for parameter
adjustments. During normal operation the VOLUME KNOB may switch to controlling other functions but will return
to MASTER LEVEL after a few seconds. The remote’s VOLUME or VOLUME will always change master
volume level except in the SETUP SPEAKER LEVELS and SETUP ‘Source’ INPUT menus.
TEMPORARY LEVEL ADJUSTMENTS
Occasionally you may find that you can’t hear the dialog very well in a particular movie, or a movie has too much
bass, etc. You can temporarily adjust the center, surround, and subwoofer settings without changing the
permanent settings you made under the SETUP SPEAKER LEVELS menu.
From Remote From Front Panel Action
CENTER À or CENTER §
see Zone 1 operation adjust center volume
REAR À or REAR §
see Zone 1 operation adjust surround volume
SUB À or SUB §
see Zone 1 operation adjust subwoofer volume
Note: these settings are temporary and will be lost when you put your receiver to sleep or turn off the main power.
If you have particular temporary setting that you use often, you may save them in a preset.
Z1 VOLUME 0.0
Z1 Master Volume 0.0 dB
Z1 CENTER 0.0
Z1 Center Volume 0.0 dB