Filter
Top Products
Operation (continued)
Battery Status
The LED will flash in TALK, muted, and STANDBY mode. When the battery has adequate
charge, this will be with a green color, changing to red when the battery is low.
Charging
The Headset is supplied with a charger to recharge the internal battery. Do not attempt
to use any other charger and refer to the “Important Information for Safe Use” section
above for important safety information.
• To charge, plug the charger into an available AC supply socket and plug the small
connector on the charging lead into the matching socket near the microphone.
• The Headset is normally charged in OFF or STANDBY modes. Charging is not active in
TALK mode.
• With the Headset turned OFF, the LED will show a steady red indication until the
Headset is charged.
• If the Headset is in any other mode when connected to the charger, the LED flashing
sequence does not change, but the LED color will indicate the charge status.
17