Filter
Top Products
PHONO Owner's Manual Page 5
Unpacking
Unpacking
The box containing your Phono1 contains the
following parts:
1 - Phono1 User's Guide
1 - Power Cable for connection to utility
power [1.85m, 6' long] (External Box
Version Only)
1 – Phono1 preamplifier
1 - Owner's Warranty / Registration Sheet
Carefully your new unit and check for shipping
damage. If there is any damage, or if any piece
is missing, please contact your
dealer or Bel Canto Design.
Save all packing materials as the packing is
specially designed to protect the preamplifier for
shipping or transporting it. If you lose or
damage the packing materials or carton, please
contact your dealer or distributor before
attempting to transport the preamplifier.
The Phono1's power supply is preset for
the proper national voltages before you r
eceive it. The power cable (External Unit
Only) will have the proper plug for your
local power system. If you believe this is
not true, please contact your dealer
immediately. Do not attempt to alter or
change power settings yourself!
Warning
Do not connect power to this preamplifier yet!
This preamplifier, like any electrical component, can be dangerous and cause injury unless cor
rect handling procedures are observed and used. Before powering this preamplifier it is
necessary to read and follow proper procedures concerning its setup and use.
Any tampering of internal parts, other than for Moving Coil / Moving Magnet (MM/MC) setup, will
immediately void your warranty.
For Warranty Coverage complete and mail the Owner's Registration Papers
immediately.