Filter
Top Products
VIRTUBE VT30FX/VT15FX/VT15CD
Installation6
Application example3.
The VIRTUBE features plenty of connectors for a wealth of applica-
tions. Here’s an example of how exible your VIRTUBE can be:
VT30FX standard set-upFig. 3.1:
For practising in the rehearsal room or at home, please wire your
VIRTUBE as shown in g. 3.1. Connect a CD player or drum com-
puter to the CD IN input. If you want to practice with headphones,
connect your headphones to the LINE OUT/PHONES jack. The
built-in loudspeaker will be muted automatically. Connect the
dual footswitch supplied with the unit to the FOOTSWITCH jack
on the VIRTUBE. The CHANNEL footswitch switches between
the channels. The IN/OUT footswitch turns the effect on and off
(VT30FX only).
Installation4.
Except for the INPUT jack (1/4" TS), all audio inputs and outputs
of the BEHRINGER VIRTUBE are on 1/4" TRS connectors. Please
see Chapter 5, “Specications” for more information.
Please ensure that the unit is installed and operated +
only by people qualied to do so. During installation
and operation the user must have sufcient electrical
contact to earth. Electrostatic discharge may affect the
operation of the unit.
1/4" TS connectorFig. 4.1:
1/4" TRS connectorFig. 4.2:
Stereo adapter cableFig. 4.3:
Mono adapter cableFig. 4.4: