Filter
Top Products
Page 5 of 5
©2011 Red Chip Company Ltd. Technical specifi cations and appearance subject to change without notice. The information contained herein is correct at the time of printing. All trademarks are the property of their respective owners. BEHRINGER accepts no liability for any loss which
may be suff ered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. 985-10000-00472
For service, support or more information contact the BEHRINGER location nearest you:
Europe Tel.: +49 2154 9206 4149
Fax: +49 2154 9206 4199
USA/Canada Tel.: +1 425 672 0816
Fax: +1 425 673 7647
Singapore Tel.: +65 6845 1800
Fax: +65 6214 0275
Australia Tel.: +61 03 9877 7170
Fax: +61 03 9877 7870
Japan Tel.: +81 3 5281 1180
Fax: +81 3 5281 1181
OUTPUT POWER
RMS Power
Stereo Mode (both channels driven)
EPX4000
8 Ω per channel, stereo 530 W
4 Ω per channel, stereo 870 W
2 Ω per channel, stereo 1440 W
EPX2800
8 Ω per channel, stereo 350 W
4 Ω per channel, stereo 600 W
2 Ω per channel, stereo 990 W
Bridged Mono
EPX4000
8 Ω bridge mode 1800 W
4 Ω bridge mode 3000 W
EPX2800
8 Ω bridge mode 1220 W
4 Ω bridge mode 2000 W
PEAK POWER
Stereo Mode (both channels driven)
EPX4000
8 Ω per channel, stereo 670 W
4 Ω per channel, stereo 1220 W
2 Ω per channel, stereo 2080 W
EPX2800
8 Ω per channel, stereo 440 W
4 Ω per channel, stereo 800 W
2 Ω per channel, stereo 1400 W
Bridged Mono
EPX4000
8 Ω bridge mode 2450 W
4 Ω bridge mode 4000 W
EPX2800
8 Ω bridge mode 1620 W
4 Ω bridge mode 2800 W
EPX4000/EPX2800
Input Sensitivity 1 V
EPX4000/EPX2800
Distortion <0.01%
EPX4000/EPX2800
Frequency Response 20 Hz - 20 kHz, +0/-1 dB
EPX4000/EPX2800
Voltage Gain 35 dB
EPX4000/EPX2800
Damping Factor > 300 @ 8 Ω
EPX4000/EPX2800
Input impedance 10 kΩ unbalanced, 20 kΩ balanced
EPX4000/EPX2800
Signal-to-Noise > 100 dBA
EPX4000/EPX2800
Controls
Front POWER switch, GAIN control
(channel 1 and 2)
Rear MODE switch, X-over Switch,
BRIDGE MODE switch
EPX4000/EPX2800
Indicators
POWER Blue LEDs
CLIP (per channel) Blue LEDs
PROT (per channel) Blue LEDs
SIGNAL (per channel) White LEDs
-20dB~-10dB
SIGNAL (per channel) White LEDs
-10dB~ 0dB
EPX4000/EPX2800
Connectors
Inputs Balanced XLR, ¼" TRS , RCA
Outputs Speakon and “touch-proof’’
binding posts
EPX4000/EPX2800
Circuit protection
Cooling Continuously variable speed fan,
back to front air ow
Ampli er protection Full short circuit, open circuit,
thermal, ultrasonic, RF protection.
Stable into reactive or
mismatched loads
EPX4000/EPX2800
Output circuit type Class H
POWER SUPPLY / VOLTAGE FUSES
EPX4000
USA / Canada 120 V~, 60 Hz (T 30 A H 250 V)
UK / Australia 240 V~, 50 Hz (T 15A H 250 V)
Europe 230 V~, 50 Hz (T 15 A H 250 V)
Japan 100 V~, 50-60 Hz (T 30 A H 250 V)
Power consumption 4500W
Mains connector Standard IEC receptacle
EPX2800
USA / Canada 120 V~, 60 Hz (T 20 A H 250 V)
UK / Australia 240 V~, 50 Hz (T 10A H 250 V)
Europe 230 V~, 50 Hz (T 10 A H 250 V)
Japan 100 V~, 50-60 Hz (T 20 A H 250 V)
Power consumption 3000 W
Mains connector Standard IEC receptacle
DIMENSIONS/WEIGHT
Dimensions (H x W x D)
Weight
Please note these speci cations are preliminary and conceptual in nature,
and as such are subject to change as product development progresses.
This information is supplied for market research purposes only and is not to be
made public in any manner. This document is solely the property of The MUSIC
Group, or one of its subsidiaries, and must be surrendered upon request of
the owner.
EUROPOWER
EPX4000/EPX2800