Filter
Top Products
Page 2 of 5
Built-in Subwoofer/Satellite
crossover for more exibility
Independent DC and thermal
overload protection on each channel
automatically protects ampli er
and speakers without shutting
down the show
“Back-to-front” ventilation
system including air lter for
reliable operation
“Built-like-a-tank“, impact-resistant,
all-steel 2U rackmount chassis
High-quality components and
exceptionally rugged construction
ensure long life
Conceived and designed by
BEHRINGER Germany
Accelerated Transient Response
Delivers the Knockout Punch
It takes huge pulses of energy
(current and voltage) to propel a woofer
cone out fast enough to match a bass
beat. That’s called Transient Response
and it’s the holy grail of amp designers.
By carefully selecting transistors with
extremely high slew rates and optimizing
other proprietary parts of our circuitry,
EPX amps can react instantly to even the
most demanding electronic bass impulses.
If the woofers in your PA system can keep
up, your audience will hear a tighter,
crisper, more natural sound.
BEHRINGER didn’t invent Class-H
technology, but our R&D Department
has been working for years to perfect our
own version, creating lightweight amps
that run cool and achieve our goal of
Accelerated Transient Response.
Everything You Need
The simple front panel controls of
these amps give you all of your sound’s
vital signs at a glance. After pressing
the Power Button, the POWER LED will
light when the amp is ready for action.
Both channels have independent gain
dials, as well as CLIP LEDs that notify you
when the signal is distorted and you need
to reduce the gain. There are also SIGNAL
LEDs that light up when a signal is present
at the input.
Panel Discussion
The EPX Series’ INPUTs accept
balanced XLR, ¼ " TRS, and unbalanced
¼ " TS and RCA connections. Take your pick
of professional locking speaker outputs
or touch-proof binding posts to securely
connect speakers.
A panel of switches located on the back
o ers an array of cool options applicable
to both channels. The switchable Clip
Limiter lets you get even more out of the
ampli er without overdriving either it
or your speaker system. Built-in circuitry
automatically senses when the amp is
being overdriven into “clipping” and
instantaneously reduces the input level
just enough to avoid clipping distortion.
Continued on next page
IEC
power
socket
Cooling
fans
Professional
locking speaker
connections
“Touch-proof”
binding
posts speaker
outputs
Built-in CROSSOVER
switch — dedicated
100 Hz CH1/CH2 or
FULLRANGE
MODE switch
— mono/
stereo/bridge
LIMITER
on/o
switch
INPUT accepts
balanced XLR,
¼ " TRS, and
unbalanced
¼ " TS and
RCA connections
0
-10
-20
Signal
level LED
meter with
clipping LED
Ventilation
openings
Detented
channel
GAIN controls
Power
Switch
EPX4000/EPX2800
EUROPOWER
EPX4000/EPX2800