Behringer EPQ 2000 Stereo Amplifier User Manual


 
Page 8 of 9
EPQ900
Output Power
RMS
Stereo Both channels driven
8 Ω per channel, stereo 175 W
4 Ω per channel, stereo 275 W
Bridged Mono Both channels bridged
8 Ω bridge mode 580 W
Peak Power
Stereo Both channels driven
8 Ω per channel, stereo 245 W
4 Ω per channel, stereo 390 W
Bridged Mono Both channels bridged
8 Ω bridge mode 900 W
System
Controls
Front Power switch GAIN control
(channels 1 and 2)
Rear Mode switch (Mono, Stereo, Bridge)
Indicators
POWER Blue LED
LIMIT (per channel) Blue LED
SIGNAL (per channel) White LED (-20 dB, -10 dB,0 dB)
Connectors
Inputs 2 x XLR / 1/4" TRS combo jacks
Input impedance 10 kΩ unbalanced, 20 kΩ balanced
Outputs 2 x locking-style
professional speaker connectors
Output circuit type Class H
Distortion < 0.3%
Frequency Response 20 Hz - 20 kHz, +0 / -1 dB
Damping Factor > 350 @ 8 Ω
Signal-to-Noise 104 dB
Circuit Protection
Cooling Continuously variable speed fan
Right-to-left air ow
Amplier protection Full short-circuit, overcurrent,
DC protection, thermal protection
Load protection On/o muting, DC fault power
supply shut down
Power supply / Voltage (Fuses)
USA / Canada 120 V~, 60 Hz (T 10 A H 250 V)
UK / Australia 240 V~, 50 Hz (T 6.3 A H 250 V)
Europe 230 V~, 50 Hz (T 6.3 A H 250 V)
China 220 V~, 50 Hz (T 6.3 A H 250 V)
Japan 100 V~, 50/60 Hz (T 10 A H 250 V)
Power consumption 1050 W
Mains connector Standard IEC receptacle
Dimensions/Weight
Dimensions (H x W x D) approx. 1.9 x 19.0 x 10.4"
approx. 49 x 482 x 265 mm
Weight approx. 10.8 Ibs / 4.9 kg
EPQ450
Output Power
RMS
Stereo Both channels driven
8 Ω / 1 kHz @ 1% THD 95 W
4 Ω / 1 kHz @ 1% THD 155 W
Bridged Mono Both channels bridged
8 Ω / 1 kHz @ 1% THD 310 W
Peak Power
Stereo Both channels driven
8 Ω / 1 kHz 130 W
4 Ω / 1 kHz 230 W
Bridged Mono Both channels bridged
8 Ω / 1 kHz 460 W
System
Controls
Front Power switch GAIN control
(channels 1 and 2)
Rear Mode switch (Mono, Stereo, Bridge
Indicators
POWER Blue LED
LIMIT (per channel) Blue LED
SIGNAL (per channel) White LED (-20 dB, -10 dB,0 dB)
Connectors
Inputs 2 x XLR / 1/4" TRS combo jacks
Input impedance 10 kΩ unbalanced, 20 kΩ balanced
Outputs 2 x locking-style
professional speaker connectors
Output circuit type Class AB
Distortion < 0.3%
Frequency Response 20 Hz - 20 kHz, +0/-1 dB
Damping Factor > 220 @ 8 Ω
Signal-to-Noise >102 dBA
Circuit Protection
Cooling Continuously variable speed fan
Right-to-left air ow
Amplier protection Full short-circuit, overcurrent,
DC protection, thermal protection
Load protection On /o muting, DC-fault power
supply shutdown
Power supply / Voltage (Fuses)
USA / Canada 120 V~, 60 Hz (T 6.3 A H 250 V)
UK / Australia 240 V~, 50 Hz (T 3.15 A H 250 V)
Europe 230 V~, 50 Hz (T 3.15 A H 250 V)
China 220 V~, 50 Hz (T 3.15 A H 250 V)
Japan 100 V~, 50/60 Hz (T 6.3 A H 250 V)
Power consumption 530 W
Mains connector Standard IEC receptacle
Dimensions/Weight
Dimensions (H x W x D) approx. 1.9 x 19.0 x 10.4"
approx. 49 x 482 x 265 mm
Weight approx. 10.4 Ibs / 4.7 kg
EUROPOWER
EPQ2000
EPQ1200/EPQ900
EPQ450/EPQ304