Filter
Top Products
Page 2 of 9
Minimum depth chassis
(10.1" / 257 mm) and ultra-light
weight design (14.8 lbs / 6.7 kg),
ts into compact, inexpensive
eects racks
EPQ900: 900-Watt Light Weight
Stereo Power Amplier
2 x 390 Watts into 4 Ohms;
2 x 245 Watts into 8 Ohms
Independent limiters for each
channel oer maximum output level
with reliable overload protection
Servo-balanced XLR and ¼" TRS
inputs plus professional
speaker connectors
Minimum depth chassis (10.1" /
257 mm) and ultra-light weight
design (10.8 lbs / 4.9 kg) ts into
compact, inexpensive eects racks
EPQ450: 460-Watt Light Weight
Stereo Power Amplier
2 x 230 Watts into 4 Ohms;
2 x 130 Watts into 8 Ohms
Independent limiters for each
channel oer maximum output level
with reliable overload protection
Servo-balanced XLR and ¼" TRS
inputs plus professional
speaker connectors
Minimum depth chassis (10.1" /
257 mm) and ultra-light weight
design (10.3 lbs / 4.7 kg) ts into
compact, inexpensive eects racks
EPQ304: 300-Watt Light Weight
4-Channel Power Amplier
4 x 75 Watts into 4 Ohms;
4 x 50 Watts into 8 Ohms
Independent limiters for each
channel oer maximum output level
with reliable overload protection
Everything You Need
The simple front panel controls and
indicators of these amps provide all
of your system’s vital signs at a glance.
After pressing the Power Button,
the POWER LED will light to show the
amp is ready for action. All channels have
independent gain dials with SIGNAL
LEDs that light when a signal is present,
as well as clip LEDs to indicate when the
signal is distorted and you need to reduce
the gain.
While all EPQ models accept balanced
XLR and ¼" TRS INPUTs, the EPQ2000
and EPQ1200 also accept unbalanced
RCA connections. Professional locking
speaker outputs are provided to securely
connect to your passive loudspeakers,
plus touch-proof binding posts are
supplied on the EQP1200 and EPQ2000
models. The same panel contains switches
that allow you to put these amps to work
in either mono, stereo or mono bridge
mode. The four-channel EPQ304 can be
operated in quad mono, dual stereo or
dual bridge mode.
A built-in CROSSOVER switch
(EPQ2000 and EPQ12000 only) allows you
operate in biamp mode, sending low
frequency content to subwoofers via
the CH1 output and mid/high frequency
output to CH2. The crossover frequency is
preset internally at 100 Hz. Additionally,
the EPQ2000 and EPQ12000 models each
feature a built-in, switchable LIMITER for
the ultimate in loudspeaker protection.
Value
BEHRINGER’s new EPQ power amps are
exceptionally light, pack massive power
and are built to withstand the rigors
of the road. With four unique models
to choose from, there’s an EPQ Series
amp that is ideal for your application,
no matter how diverse–plus its light price
tag will leave you with money left over to
acquire more stu to amplify! Check out
the EPQ Series today and nd out why
BEHRINGER power amps are among the
most popular on Earth.
1 2 1 21 2
Stereo Bridge Mono
EPQ Series Operating Modes
EUROPOWER
EPQ2000
EPQ1200/EPQ900
EPQ450/EPQ304