Behringer E1520A Speaker User Manual


 
EUROLIVE E1220A/E1520A
Specications 7
Installation4.
Both audio inputs of the BEHRINGER E1220A/E1520A and the
LINK OUTPUT connector are fully balanced. To maximize interfer-
ence compensation, try to establish balanced connections to other
equipment, whenever possible.
1/4" TRS connectorFig. 4.1:
XLR connectorFig. 4.2:
Make sure that only competent personnel install your +
E1220A/E1520A. They must be sufciently earthed dur-
ing and after the installation process. Otherwise, elec-
trostatic discharges may negatively affect the operating
characteristics of your equipment.
Specications5.
Output power
Low-frequency range
RMS @ 1% THD 200 W @ 8 Ω
Peak power 320 W @ 8 Ω
High-frequency range
RMS @ 1% THD 50 W @ 8 Ω
Peak power 80 W @ 8 Ω
Input
XLR connector (servo-balanced)
Sensitivity -40 to +4 dBu
Input impedance 24 kΩ
1/4" jack (servo-balanced)
Sensitivity -40 to +4 dBu
Input impedance 24 kΩ
Link output
XLR connector
System data
E1220A
Frequency range 60 Hz to 20 kHz
Crossover frequency 2.2 kHz (12 dB)
Maximum sound pressure level 124 dB @ 1 m
Limiter optical
Dynamic Equalizer Processor-controlled
E1520A
Frequency range 50 Hz to 20 kHz
Crossover frequency 2 kHz (12 dB)
Maximum sound pressure level 125 dB @ 1 m
Limiter optical
Dynamic Equalizer Processor-controlled
Equalizer
HIGH 12 kHz / ± 15 dB
LOW 80 Hz / ± 15 dB
Power supply
Mains voltage/fuses
100 -120 V~, 50/60 Hz T 5,0 A H 250 V
220 -230 V~, 50/60 Hz T 2,5 A H 250 V
Power consumption max. 400 W
Mains connector Standard IEC receptacle
Dimensions/Weight
E1220A
Dimensions (H x W x D) approx. 400 x 410 x 585 mm
approx. 15.7" x 16.1" x 23"
Weight approx. 22.3 kg
approx. 49 lbs.
E1520A
Dimensions (H x W x D) approx. 465 x 485 x 640 mm
approx. 18.3" x 19" x 25.2"
Weight approx. 26.3 kg
approx. 58 lbs.
BEHRINGER is constantly striving to maintain the highest professional standards.
As a result of these efforts, modications may be made from time to time to existing
products without prior notice. Specications and appearance may differ from those
listed or illustrated.