Filter
Top Products
Dear Friend,
Thank you for selecting Bazooka
®
subwoofer speaker systems for your car stereo
system. The Bazooka Reference series represents SAS‘s continued commitment to
efficiency and design. An innovative manufacturing process developed by SAS for
the Bazooka provides consumers with state-of-the-art speaker system design. At
SAS, we take pride in manufacturing the most revolutionary bass speaker systems
ever created, featuring our patented Bass Tubes
®
enclosure design, and we hope
you will take pride in owning them.
Several years ago, we realized that efficiency was the wave of the future in
autosound, so we made a commitment to design, manufacture, and deliver the most
efficient speaker systems possible.
Today we market our patented speaker systems worldwide and the high quality of
the Bazooka brand is well respected by consumers and dealers of all nationalities.
When properly installed, Bazooka subwoofer speaker systems will give you
years of clean uninterrupted sound reproduction. Therefore, I urge you to take a
few minutes of your time to review this instruction booklet. It was designed to give
you a better understanding of our products and to explain how to apply them properly.
Thank you again for choosing Bazookas. Our early commitment to quality has
made them the product of choice, and I am sure you will agree that you have made
the right one! Enjoy!
Sincerely,
JON C. JORDAN
President
SAS/BAZOOKA
DESIGN &
ENGINEERING
AWARD
I
N
N
O
V
A
T
I
O
N
S
'
9
1
C
O
N
S
U
M
E
R
E
L
E
C
T
R
O
N
I
C
S
S
H
O
W
S
CONGRATULATIONS
1
14
The built-in crossover on the Amplified Bazooka is a 18 dB per octave electronic
low pass filter, it has a 60 Hz to 250 Hz variable crossover point. Select the
crossover point that you feel best fits your system design. Set the potentiometer
labeled XOVER to the point you selected, 60 Hz being all the way to the left
(counterclockwise) and 250 Hz being all the way to the right (clockwise). When
you have set the crossover, proceed to the next step.
All SAS
®
Reference Series products are covered under warranty for two full years from
the date of purchase. Terms and conditions of the warranty are as stated on the warranty
card included in the box with the product. SAS recommends that you use only
authorized BAZOOKA
®
dealers to install this product. Improper or incorrectly
performed installation voids this warranty.
WARRANTY
ADJUSTING THE CROSSOVER
ADJUSTING LEVEL GAIN CONTROL
Locate the potentiometer labeled LEVEL. This is the level control. Start with the level
control turned all the way to the left (counterclockwise). The bass should be off or
very low at this point. Turn up your head unit until the sound from the existing speak-
ers starts to clip or distort. This is the point in your system where you will get max-
imum volume with the least amount of distortion. With the head unit at this point,
turn the level gain control up slowly until the bass volume blends well with the exist-
ing high frequency speakers. This should be the proper setting for the level gain
control. Now that the level is set, you may want to go back to the x-over control
and adjust the x-over point by ear to meet the desired sonic quality of your system
BASS TUBES
®
ENCLOSURE
BAZOOKA
®
subwoofer speaker systems exclusively incorporate the
revolutionary Bass Tubes
®
patented subwoofer enclosure design available only
from SAS
.
®
, SAS, BAZOOKA, BASS TUBES, & LISTEN TO YOUR EARS are registered trademarks of Southern Audio Services, Inc. PAT. NO. 4,567,959 PAT NO. 5,097,513