Banner MA3P Stereo Amplifier User Manual


 
Beam Pattern
3
Dimensions, TR-100 Mounting Track
"A" Di-
mension
1" (25mm)
4" (10cm)
6" (15cm)
12" (30cm)
Minimum
number of slots
1
2
3
8
Track Model
TR100-1
TR100-4
TR100-6
TR100-12
PVC mounting track for MICRO-AMP components is available in 6 and 12 inch
lengths for systems which use multiple components. For example, a 6-inch length
will accomodate one MPS-15 power supply plus two additional RS8 sockets with
modules.
Longer lengths of mounting track may be supplied on a quote basis.
TR100-1 1 inch (25mm) long (supplied with RS8 socket)
TR100-4 4 inch (100mm) long (supplied with MPS-15 series power supply)
TR100-6 6 inch (150mm) long
TR100-12 12 inch (300mm) long
MICRO-AMP
®
System Accessories
The RS8 socket is the most fre-
quently used means of mount-
ing and wiring a MICRO-AMP
module. It consists of a socket
with two four-terminal connec-
tion strips, all wired together
onto a PC board. The PC board
assembly slides into a 1 inch
(25mm) long PVC track which
is used to mount the entire as-
sembly. A hold-down screw
keys the correct polarity of the
module.
The RS8K is a kit of parts that
comprise the socket portion of
the RS8 assembly. It is used to
provide a socket for MICRO-
AMP modules that are installed
onto printed circuit boards. The
RS8K consists of a molded
socket block and 8 individual
socket pins. A nylon screw is
included to afx the socket block
to the PC board. The drill size for
the pins is #50 (.070"; 1,8mm).
Drill pattern dimensions are
included.
RS8 Socket
RS8K Socket
Dimensions, MA3 and MA3P, shown with RS8
Wiring Socket
MICRO-AMP
®
module
pin conguration.
Mounting Track