Filter
Top Products
Connection to other Bang &
Olufsen systems …
Use a Power Link cable of the
correct type to connect the loud-
speaker to a Power Link socket on
the Bang & Olufsen system.
For further information, refer to the
Guide enclosed with the Bang &
Olufsen system.
Power Link cable: Do not use a
cable of the older type, as this will
cause noise, and therefore not give
optimum sound quality! The new
type has a triangular mark on the
plug.
Connection to BeoVision 7 …
Connect the loudspeaker to one of
the Power Link sockets on the left
BeoVision 7 socket panel.
For further information about the
BeoVision 7 socket panels, refer to
the Guides enclosed with the
product.
The two mains cords and the
Power Link cable are enclosed with
BeoVision 7.
Cable clamp: For safety reasons,
the mains cord from the wall outlet
must be secured to the loudspeaker.
To do so, tug the cord behind the
clamp.
Power Link
Mk 3
7
BeoVision 7
BeoLab 7