Filter
Top Products
2
INSIDE THIS INSTRUCTION MANUAL
Important Safety Instructions / Specifications................................................................2
Set-up Information .......................................................................................................3
Panel Specifications .....................................................................................................4
Controls and Connections.............................................................................................5-7
Contact Information .....................................................................................................8
11. Read these instructions.
12. Follow all instructions.
1
3. Keep these instructions.
14. Heed all warnings.
15. Do not use the LX-18A V2 near water.
1
6. Clean only with a dry cloth.
17. Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
18. Do not install near any heat sources such as
radiators, stoves, or other devices that may
produce heat.
19. Do not defeat the safety purpose of the
polarization or grounding-type plug. A
polarized plug has two blades with one wider
than the other. A grounding-type plug has two
blades and a third grounding prong. The wide
blade or the third prong is provided for your
safety. If the provided plug does not fit your
outlet, consult an electrician for replacement
of the obsolete outlet.
10. Protect the power cord from being walked on
or pinched, particularly at the plug and the
point wher
e it exits the LX-18A V2 amplifier
.
11. Only use attachments / accessories that are
r
ecommended by B-52 Pr
o-Audio.
12. Use only with a car
t, stand, bracket or table
specified by B-52 Pro-Audio or sold with
the LX-18A V2. When a car
t is used, use caution
when moving the car
t / LX-18A V2 combination
to avoid injury from-tip over.
13. Unplug the LX-18A V2 during lightning stor
ms or
when un-used for long periods of time.
14. Refer all servicing to qualified personnel.
Ser
vicing is r
equired when the LX-18A V2 has
been damaged in any way such as when
power-cord or plug is damaged, liquid has
been spilled, or objects have fallen into the
LX-18A V2 cabinet, the LX-18A V2 has been
exposed to moisture or rain, does not operate
nor
mally
, or has been dropped.
15. To r
educe the risk of fir
e or electric shock, do
not expose the LX-18A V2 to rain or moisture.
IMPORTANT SAFETY
INFORMATION
CAUTIONCAUTION
RISK OF ELECTRIC SHOCKRISK OF ELECTRIC SHOCK
DO NOT OPENDO NOT OPEN
HEED ALL WARNINGS
WARNING: To reduce the risk or fire or
electrical shock do not expose this equipment
to rain or moisture.
AMPLIFIER SPECIFICATIONS:
Made In The U.S.A.
1200 watt RMS Digital Amplification.
800 watts RMS @ 8 Ohms.
1200 watts RMS @ 4 Ohms.
Frequency Range: 30-120Hz (+/- 3db).
Crossover Frequency: 120 Hz.
Crossover Slope: 4th Order (24db/octave) - LP & HP
Subsonic Filter: 6th Order (36 db/octave).
THD: 0.075% @ Rated Power Over Full Bandwidth.
Nominal Impedance: 8 Ohms
Sensitivity: 102 dB
Peak SPL: 132 dB
Power Consumption @ Idle: Less than 20 watts.
Power Requirements: 120v<>60Hz<>12a.
AMPLIFIER FEATURES:
XLR Balanced Inputs.
XLR Balanced Full-Range Outputs
XLR Balanced (120 Hz) High-Pass Outputs.
0–180 Degree Phase Switch.
Neutrik
tm
Speaker Output.
Full Thermal & Short Circuit Protection.
Signal Sensing On/Off Circuitry.
CABINET FEATURES:
Void-free 7-layered plywood Construction.
Rugged black carpet finish
4” Heavy-Duty Casters.
Aluminum front panel heat sink.
Reinforced internal bracings
Dimensions (W) x (H) x (D): 24” x 36” x 36”
Weight: 167 lbs