Azden WLTPRO Headphones User Manual


  Open as PDF
of 4
 
4
WM-PRO TRANSMITTER
1. Loading Baery
Insert 1 9-volt baery into the baery compartment. Be careful not to force the
baery compartment lid closed.
2. Microphone
Plug the EX-503 (lavalier mic) or EX-413 (handheld mic) into the mic jack. Extend
the cord as much as possible since it doubles as the transmier’s antenna.
3. Power/Frequency Selector Switch
This switch is used to turn the unit on and o as well as to select a frequency.
4. Mounng
The Transmier can be aached to a belt using the clip provided or placed in a
pocket.
SPECIFICATIONS
WM-PRO & WM/T-PRO TRANSMITTERS
TRANSMISSION FREQUENCY: F1—169.445MHz
F2—170.245MHz
MODULATION SYSTEM: FM modulaon
BATTERY: 9V x 1 (WM) / 1.5V (AA) x 1 (WM/T)
POWER CONSUMPTION: 30mA (WM)
100mA (WM/T)
DIMENTIONS: 86(h) x 60(w) x 21.5(d)mm (WM)
ɸ 62 x 221mm (WM/T)
WEIGHT (including baery):
98g (WM) / 170g (WM/T)
MICROPHONE:
WR-PRO RECEIVER
RECEPTION FREQUENCY: F1—169.445MHz
F2—170.245MHz
Double Superheterrodyne System
RECEPTION SENSITIVITY: 2µV at S/N40dB
BATTERY: 9V x 1 (not included)
POWER CONSUMPTION: 25mA
MONITOR OUTPUT: Voltage: 1V
(Load: 30Ω, Modfreq: 1KHz, Dev: ±7KHz)
MICROPHONE OUTPUT: Voltage: 8mV
(Load: 10KΩ, Modfreq: 1KHz, Dev: ±7KHz,
Impedance: 300Ω)
DIMENSIONS: 86(h) X 60(w) X 21.5(d)mm
CORPORATION
147 NEW HYDE PARK ROAD, FRANKLIN SQUARE, NY 11010
PHONE: 516-328-7500 EMAIL: sales@azdencorp.com WEB: www.azdencorp.com
 previous