Azden ASP 25 Speaker System User Manual


 
Rated Power 20 watts continuous
Frequency Response 65Hz – 18kHz
Max SPL @ rated output 101dB @ 1 meter
Woofer 5.25" (133.35mm) high efficiency
magnetically shielded
Tweeter 1" (25mm) dome
Crossover 1
st
order passive @ 8kHz
Tone Control -6dB/octave sliding lowpass (3kHz to 8kHz)
Wireless inputs 2 user-installable receivers
VHF (169-213MHz) – 30 fixed
UHF (794-806MHz) – 63 user-selectable
Infrared – 2 fixed
Wired inputs/output
Mic -81dBV (0.089mV
RMS
) for 1 watt
100K
unbalanced, ¼" phone jack, variable
Line -40dBV (10mV
RMS
) for 1 watt
10K
unbalanced, RCA jack, variable
Line-Out +15dBV max - RCA jack
Weight 8.5lb (3.85kg) approx. w/out receivers
Dimensions 12.4"H x 7.09"W x 5.6"D (315 x 180 x 142mm)
Compliance UL, C-UL, and FCC approved
A
C Power Requirements User switchable
110-125 / 210-240VAC - 50Hz / 60Hz
Included w/speaker Removable wall-mount bracket with 2 screws
and rubber anti-rotate pads, removable right-angle
AC cord, 4 self-adhesive anti-skid pads, 4 module
screws, 1 or 2 noise-canceling circuit boards
(depending on how many modules are installed)
APS 25 SPECIFICATIONS
AZDEN Corp., P.O. Box 10, 147 New Hyde Park Road, Franklin Square, NY 11010
516.328.7500 [vox] • 516.328.7506 [fax]
azdenUS@azdencorp.com [email] • www.azdencorp.com [on the web]
- Specifications subject to change without notice -
USER’S GUIDE
© 2004 Azden Corp. • Printed in USA25-1002
APS 25
MULTI-PURPOSE / MULTI-FUNCTION POWERED SPEAKER SYSTEM