Filter
Top Products
User’s Manual
ENG-5
English
3.1 First time Launch
The first time you power on the AVerLife HD Theatre unit, it will automatically display the Setup Wizard:
Press OK.
Select a country and press OK.
Press Next to continue the setting.
Press OK to select a country and city
for weather information display.
* Pleaseset up Cityat first if you want to show the
“RSS weather”. Otherwise, there will beno information
shown in RSS weather.
Choose your country and menu language.
In “IP”, choose“Static” to customize the
IP settings or “DHCP” to automatically
configure the available IP address.
Then press Next.
Select a city and press OK.
Then theAVerLife HD Theater willstart to
scan the channels in your area.
After scanning for available channels,
you can start to watch TV.
ll
hof
sts.)
請增加一個城市
3.2 The Remote Control
The diagram below shows the remote control unit layout.
1
4
5
6
7
8
9
10
3
2
11
12
13 14
1615
1817
19
22
20
21
23
1.
Turn the unit on/stand-by
*Press Power button to turn on the model;
press again to turn into stand-by mode.
L Stand-by mode: Power-saving sleep mode
2. (This function is not supported)
(This function is not supported)
3. Launch Weather widget
(This function is not supported)
4. (This function is not supported)
Display the current program information. (DTV
only)
5.
Numeric Buttons
To select a TV channel
6. Go to the home menu.
7. Choose a channel number over 100.
8. View EPG information.
9. Go to the previously selected channel
10. Open the channel list.
11. Use the arrow button to navigate all
on-screen items. Use OK to confirm the
selection.