Filter
Top Products
7
Adjustment
1. Both large black knobs must be loosened in order to tilt the Center Channel up or
down. NOTE: When the pressure bearing has been loosened the Center Channel will
tend to remain in its previously locked position. It may be necessary to apply pressure in
order to tilt the Center Channel to a new position.
2. After adjustment of Center Channel position, make sure both knobs are snugly
tightened.
3. Proper tilt is necessary for the full integration of the Center Channel with left and right
speakers. The optimum position will depend on both the electronics being used and
room acoustics. NOTE: Since the Center Channel has an open vertical dispersion, the
angle of optimal tilt may be greater than might be apparent visually.
4. The Center Channel MUST BE played with the tweeter grilles in place, however the
central woofer grille may be removed.