Filter
Top Products
6
3 Center Channel
Mounting
1. For mounting to Symbol Subwoofer, remove four black bolts from top surface of
subwoofer cabinet.
2. Locate Center Channel / Mounting Bracket assembly over the four mounting holes as
shown in Figure 3.1. DO NOT DISASSEMBLE CENTER CHANNEL FROM BRACKET.
3. Tighten four black bolts with 5/32 Allen wrench until snug.
4. Connect Center Channel wiring via rear terminals. BE SURE TO OBSERVE PROPER
POLARITY (+ / -).
Figure 3.1 – Center Channel mounting holes
Holes for mounting
Center Channel to Wall
Holes for mounting
Center Channel to Sub