Filter
Top Products
6
Installing the Upper Grilles
The upper grille assemblies are contained within the accessory box (the lower grilles are
shipped in their installed positions). The grilles are installed with friction fasteners and press
into place on the speaker cabinets.
Orientation of the Felt Anti-Diffraction Mask
The grille assembly includes a felt anti-diffraction mask. Should the felt mask be removed,
be sure to note the correct inside-outside orientation when re-installing it. The tweeter
and midrange openings are beveled on the side that faces the listener (away from the
speaker).
Installing the Mounting Feet Spikes
The mounting feet spikes provide for the ultimate coupling of your loudspeakers to the
floor. It is recommend that the spikes be installed only after you have selected a suitable
location for your loudspeakers, as positioning adjustments become more difficult once
the spikes are installed.
To install the spikes, simply thread them into the mounting feet, and fix them in place with
the supplied threaded nuts. You may also make small leveling adjustments for your floor
by raising or lowering one or more of the spikes.