Filter
Top Products
5
Opening the Loudspeaker Containers
Carefully cut the packing tape on the BOTTOM ONLY, open the flaps to the container
and stand upright. Lift the container off of the loudspeakers vertically; the speakers
stand upon protective foam padding.
Next, gently lay the speaker upon a soft cloth or towel. Install the mounting feet in this
position. It is recommended to wait before installing the spikes in the feet, as they can
make final placement difficult and can damage your floor. Please refer to Figure 2.1.
2.
Remove outer carton
vertically; speaker stands
upon foam padding.
3.
Lay speaker upon a soft cloth
or towel. Install feet without
spikes in this position.
1.
Cut outer carton packing
at the BOTTOM ONLY,
open flaps and stand upright.
Figure 2.1 – Unpacking the loudspeakers.