Filter
Top Products
128-6901
6 of 28
Introduction
The Audiovox SIRIUS® Shuttle processes the satellite
signals received by the externally mounted antenna
(purchased separately as part of the Home or Vehicle
Kits). The Shuttle recognizes and decodes the incoming
SIRIUS® program information and provides an audio
signal to your radio or other audio output equipment.
NOTE: The SIRIUS® signal can be received and
processed virtually anywhere as long as there
are no obvious satellite signal obstructions
such as nearby buildings, high terrain,
parking garages or tunnels.
The Shuttle is typically installed in an
accessible location of the vehicle (dash area),
consistent with line-of-sight operation of the
remote control, and/or within easy reach of the
driver. For home use, situate the Shuttle
close to your stereo receiving equipment.
Enjoying Your SIRIUS®
Shuttle
You can begin to enjoy Sirius® Satellite Radio as soon
as the Shuttle and Kit installation are complete:
1.Set up your Audiovox Shuttle using the installa-
tion instructions included in your Home Kit or
Vehicle Kit, or with the help of a professional
installer.
NOTE: Refer to Antenna Aiming (page 18) during
the installation procedure.
2. When power is available to the unit, note that the
integral Power button LED icon lights red. Then
press the Power button to turn on the Shuttle.
3. The Sirius logo (
) appears on the display
followed by the Sirius preview stream. If this is the
first time using the Shuttle, the screen will display
“Updating Channels”. If not, go to stream 184 using
the direct channel method, page 9, Direct Tuning.
4.To obtain the Sirius identification (ID) number,
press the MENU button. The Menu Options
page appears with the Sirius ID option high
lighted. Press the Encoder knob and the 12
digitSirius ID number will appear. Write the number
here for future reference.
5. Activate your Sirius® radio service ---- it’s easy. You
have one of two choices to activate your service:
-6-