Filter
Top Products
128-6901
20 of 28
-20-
Time Zone:
The Time Zone option provides:
(GMT-9:00) Alaska
(GMT-8:00) Pacific
(GMT-7:00) Mountain
(GMT-6:00) Central
(GMT-5:00) Eastern
(GMT-4:00) Atlantic
(GMT-3:30) Newfoundland (Abbreviated as
GMT-3:30 Newfndlnd)
Use the Encoder knob to highlight the desired
time zone and press the Select Button.
Daylight Savings Time (DST) Observance:
Activate this function if your area is subject to DST;
rotate the Encoder knob to toggle between DST
Observed (default) or DST Not Observed.
NOTE: When the shuttle has not been turned on
or has been removed from the docking
port for any length of time be sure to
position the antenna toreceive the
satellite signal so the time can be
automatically updated. If the time
Alarm Clock:
When this menu option is highlighted and selected,
you will be able to set the unit to turn on at a specific
time. The last selected stream prior to shutdown will
be present when the Alarm feature is activated. Addi-
tionally, a series of beep tones will be heard. Press
any button on the front panel to silence the alarm
tones. The alarm will trigger again at the set time
unless the Alarm Off feature is selected under the
Set Alarm function.
Set Alarm (Default-Off)
Use the Encoder knob to toggle between Alarm
On or Alarm Off and press the Select Button
for desired alarm status. When the alarm is on
the time will be displayed on the default screen in
reverse image.
information has been lost, the shuttle will
not display the time information and
preprogrammed alarms will not be
triggered until the shuttle updates the
time information using the satellite
signal.