Audiovox PMP180U Stereo Receiver User Manual


 
PCD160U/PMP180U
7
OPERATING INSTRUCTIONS
Power On/Off Button
Press the POWER button (1) to turn the unit on
and off when the vehicle ignition switch is on.
When the unit is off, the clock is automatically
displayed on the Liquid Crystal Display (LCD)
panel unless the ignition switch is off. If the
radio is off when the ignition switch is turned off,
the POWER button must be pressed to turn the
radio on after the ignition switch is turned on. If
the ignition switch is turned off while the radio is
on, the radio will come on automatically when
the ignition switch is again turned on.
Liquid Crystal Display Panel
The Liquid Crystal Display (LCD) panel displays
the frequency, time, and all activated functions,
including a 5-bar graph which depicts the signal
level.
NOTE: It is a characteristic of LCD panels
that, if subjected to cold temperatures for an
extended period of time, they may take
longer to illuminate than under normal
conditions. In addition, the visibility of the
numbers on the LCD may slightly decrease.
The LCD read-out will return to normal when
the temperature inside the vehicle increases
to a normal range.
Volume Control
To increase or decrease the volume level, turn
the MULTI/JOG control (3) that surrounds the
SEL/MENU button (4). The volume will
increase and the level will be shown on the
display panel from a minimum of “VOL 0” to a
maximum of “VOL 46”. The display will
automatically return to the normal indication 5
seconds after the last volume adjustment or
when another function is activated. This knob is
also used in conjunction with the SEL/MENU
button to adjust the bass, treble, balance and
fader levels.
Select Button (SEL/MENU)
The SEL/MENU button is used to select the
audio function (volume, bass, treble, balance or
fade) to be adjusted using the MULTI/JOG
control (3). Press the SEL/MENU button once
to set the unit for volume adjustment (“VOL”
and the setting number will momentarily appear
on the display panel). Press the button
additional times to select bass (BAS), treble
(TRE), balance (BAL), fader (FAD), and volume
(VOL) again. The display returns to the normal
indication 5 seconds after the last adjustment or
when another function is activated.
1
2
3 4
PCD160U
AM/FM/CDRECEIVER
/
CD-IN
1
3
2
4