Filter
Top Products
HIGH PERFORMANCE STEREO AMPLIFIER
This power amplifier has been designed to provide high quality performance with
a minimum of maintenance. However, it's performance will only be as good as the
care and quality of components with which it is installed. We therefore advise that
you read these instructions very carefully to familiarize yourself with the product and
it's features.
Should you require assistance with the installation or wiring of this unit, please call
our toll-free "HELP" line at 1-800-645-4994 during the days/hours shown.
Monday - Friday
Saturday
8:30am - 7:00pm Eastern
9:00am - 5:00pm Eastern
1-800-645-4994
HELP!
-1-
SPECIFICATIONS
* Due to continuing improvement, Audiovox reserves the right to change features and design without notice.
Maximum Output Power:
4-Channel Operation:
2-Channel Operation:
Output Power @ 0.05% T.H.D.:
4-Channel Operation:
2-Channel Operation:
Output Impedance:
Frequency Response:
Channel Separation:
Signal / Noise Ratio:
100 watts x 4
200 watts x 2
50 watts RMS x 4
125 watts RMS x 2
2 - 8 ohms (stereo)
4 - 8 ohms (mono)
10 - 50,000 Hz. ± 1 dB
50 dB
90 dB (A-Weighted)
Input Impedance:
Input Sensitivity:
Filter Types:
Filter Slope:
Filter Crossover:
Bass Boost:
Supply Voltage:
Fuse Rating:
Dimensions (W x H x D):
low-level 10K ohms
high-level 100 ohms
low-level 200 mv. - 4 v.
high-level 2 - 10 v.
low-pass and hi-pass
18 dB/octave
50 - 180 Hz. (variable)
+12 or 18 dB @ 45 Hz.
(selectable)
12 volts, negative ground
20 amps. x 2
10-3/4" x 2-3/8" x 11-1/2"
273 mm x 62 mm x 290 mm