Filter
Top Products
OPERAOPERA
OPERAOPERA
OPERA
TING INSTRTING INSTR
TING INSTRTING INSTR
TING INSTR
UCTIONSUCTIONS
UCTIONSUCTIONS
UCTIONS
-1-
1 ON/OFF POWER BUTTON
Press this button to turn the unit on or off. The unit will also turn
on automatically when a compact disc is inserted if the ignition
switch is “on” or when any front panel button is pressed.
2 VOLUME / LEVEL CONTROL
To increase the volume level, turn the knob clockwise. The
volume will increase and the level will be shown on the display
panel from a minimum of “VOL 00” to a maximum of “VOL 63”. To
decrease the volume level, turn the knob counter-clockwise. The
display will automatically return to the normal indication 5 sec-
onds after the last volume adjustment or when another function is
activated. These buttons are also used in conjunction with the
Select button 3 to adjust the bass, treble, balance, and fader
levels as described in 4, 5, 6 and 7.
3 SELECT BUTTON (SEL)
CONFIRMATION TONE SELECTOR ( )
This button is used to select the audio function (volume, treble,
bass, balance, or fade) to be adjusted using the Level Control 2.
Pressing the Select button once will set the unit for treble
adjustment (“TRE” will appear on the display panel). Pressing
the button additional times will select bass (“BAS” on the display),
balance (“BAL”), fader (“FAD”) or volume (“VOL”). The display will
automatically return to the normal indication 5 seconds after the
last adjustment or when another function is activated.
Pressing and holding the button for longer than 2 seconds will
activate the Confirming Tone feature as indicated by two beep
tones and the indication appearing on the display panel. When
activated, the unit will produce a single beep tone whenever a