Filter
Top Products
-6-
cp SHUFFLE (SHF) PLAY SELECT
During disc play, press this button to play the tracks on the disc in a
random shuffled order (S---SHF will appear on the display panel). In
Shuffle Play mode, the Forward Track Select (
) will also select
tracks in the random order instead of the normal progression. Back-
ward Track Select (
) will go back to the beginning of the track in
play if it has played longer than 5 seconds or to a random track if it has
played less than 5 seconds. The Shuffle Play mode can be canceled
by pressing the button again (S---SHF indication will disappear from
the display panel).
cq DISC PAUSE (PAU) SELECT
The Pause function is used to freeze disc play when the CD player or
optional CD changer is in use. PAUSE will appear flashing on the display.
Press this button again to resume disc play; the PAUSE indication will
disappear.
cr DISC EJECT ( )
Disc play is stopped, the disc is ejected and the unit will change to
radio operation by pressing this button. If the disc is not removed from
the unit within 10 seconds of being ejected, it will automatically be re-
loaded into the unit to prevent damage (CDP will appear on the display
panel).
cs TIME/FREQUENCY DISPLAY SELECTOR (T/F)
Press this button to call the time display on the incorporated quartz
clock. Press the button again to return to radio frequency or disc dis-
play, or it will return automatically after 5 seconds.
ct THEFT-DETERRENT LED
Located on the chassis behind the front panel, a light-emitting diode
(LED) will flash when the panel is removed. The flashing light serves
as a visual warning to the would-be thief that the unit has been dis-
abled by removal of the front panel.
cu RESET BUTTON
A RESET button is located on the chassis behind the front panel. (Front
panel must be removed to access the button). The reset circuitry is
provided to protect the microprocessor circuitry and should only be
activated under the following circumstances.
1. Upon initial installation after all wiring is completed.
2. If there is a malfunction of any of the switches on the unit or of the
CD player, pressing the RESET button may clear the system and
return to normal operation.
dl FRONT PANEL RELEASE BUTTON ( )
This button is used to release the mechanism that holds the front panel
to the chassis. To detach the front panel, press the button so that the
left side of the panel is released. Grasp the released side and pull it off
of the chassis. To re-attach the panel, position the right side of the
panel in place first and then press in the left side until the mechanism
locks it into place.