Filter
Top Products
-10-
dn TRACK/DISC SHUFFLE (SHF)
When the Shuffle button is pressed, the tracks on the disc will be
played in a random, shuffled order (“SHF” will appear on the display
panel and “TRK” will flash). The Track Select button cu will also
select tracks in the shuffled order instead of the normal progression.
When all tracks on the disc have been played in shuffled order, the
next disc will be selected in normal order and its tracks played in
shuffled order. The Track Shuffle mode will be canceled by pressing
the Shuffle button again (“SHF” will disappear from the display panel
and “TRK” will stop flashing) or by activating the Repeat dm or Scan
do functions.
When the Shuffle button is pressed and held longer than 2 seconds,
both the discs and the tracks will be played in a random, shuffled
order (“SHF” will appear on the display panel and “DISC” will flash).
After all tracks on the disc have been played, the changer will
select a new disc in shuffled order and play its tracks in shuffled
order. The Disc Shuffle mode will be canceled by pressing the
Shuffle button again (“SHF” will disappear from the display panel
and “DISC” will stop flashing) or by activating the Repeat dm or
Scan do functions.
do TRACK/DISC SCAN (SCAN)
When the Scan button is pressed, the first 10 seconds of each
track on the disc will be played in order (“SCAN” will appear on the
display panel and the track number will flash). When a desired
track is reached, press the Scan button again and play of that
track will continue (“SCAN” will disappear from the display panel
and the track number will stop flashing). The Track Scan mode will
also be canceled by activating the Disc Select cr & cs, Track
Select ct, Repeat dm, or Shuffle dn functions.
When the Scan button is pressed and held longer than 2 seconds,
the first 10 seconds of the first track on each disc will be played
(“SCAN” will appear on the display panel and the disc number will
flash). When a desired disc is reached, press the Scan button
again and play of the disc will continue (“SCAN” will disappear from
the display panel and the disc number will stop flashing). The Disc
Scan mode will also be canceled by activating the Disc Select cr
& cs, Track Select ct, Repeat dm, or Shuffle dn functions.
CD CHANGER ERROR CODES
If a problem should develop while operating the CD changer, the
following error codes may appear on the display panel.
EJ: Indicates that there is no magazine loaded in the CD changer.
no_d: Indicates that there are no discs loaded in the CD
magazine in the changer.
E-01, etc.: Indicates an error in the laser reading the disc in slot
#1 of the magazine (E-02 for disc in slot #2, etc.) Eject
the magazine, remove the indicated disc and make sure
it is clean, undamaged, and loaded correctly (label side
up or down as per CD changer owner’s manual). Clean
and re-load the disc(s) as appropriate and check for
proper operation or try another disc.
E-95: Indicates a communication error between the radio and CD
changer. Check the connections and cable of the changer.
E-99: Indicates excessive temperature conditions at the CD
changer. The error code will go off and play will resume
when the temperature at the changer returns to a
normal range.