Filter
Top Products
magazine was already in the changer, play will resume from the
track on the disc previously in play.
cucu
cucu
cu &
dldl
dldl
dl DISC SELECT (CD+ & CD-)
These buttons are used to select the desired disc play. To advance
to a higher number disc, press the CD+ button cu. To return to a
lower number disc, press the CD- button dl. The number of the
disc in play will be shown on the display panel.
dmdm
dmdm
dm TRACK SELECT, CUE/REVIEW ( / )
This button is used to quickly select the beginning of a particular
track. With each momentary press of the Forward Track Select
button ( ), the next higher track number will be selected as
shown on the display panel. Similarly, with each momentary press
of the Backward Track Select button ( ), the next lower track
number will be selected.
High-speed auidible search of the disc can be made by the Cue and
Review functions. Press and hold the Cue button ( ) to advance
rapidly in the foward direction or the Review button ( ) to
advance rapidly in the reverse direction.
dndn
dndn
dn SEEK
High-speed audible search of disc can be made by pressing and
holding the SEEK button to advance rapidly in the forward direction.
NOTE: The Cue/Review, Seek functions are dependent upon the
type of CD Changer in use. Your CD Changer may or may
not be capable of these functions.
dodo
dodo
do TRACK REPEAT PLAY SELECTOR (RPT)
When the Repeat button is pressed, the RPT indication will
appear on the display panel and play of the selected track will be
continually repeated until the Track Repeat mode is canceled by
pressing the Repeat button again or by activating the Random dp
or Scan do functions.
dpdp
dpdp
dp TRACK SCAN SELECTOR (SCN)
When the Scan button is pressed, the SCAN indication will appear
on the display panel, and the first 10 seconds of each track on the
disc will be played in order. When a desired track is reached,
press the Scan button again and play of the selected track will
continue ( SCAN will disappear from the display panel). The
Track Scan mode will also be canceled by activating any other disc
function (Track Select, Repeat or Random).
dqdq
dqdq
dq RANDOM PLAY SELECTOR (RND)
When the Random button is pressed, the RND indication will
appear on the display panel and the tracks on the disc will be
played in a random, shuffled order. The Track Select buttons dm
will also select tracks in the shuffled order instead of the normal
progression. The Track Shuffle mode can be canceled by
pressing the Shuffle button again or by activating the Repeat dn
or Scan do functions.
If a problem should develop while operating the CD changer, the error code Err may appear on the display panel. This can indicate
a number of problems with the unit, including a mechanical error or an error in the microprocessor control of the changer. If the error
code should appear, try ejecting and re-loading the magazine into the changer. While the magazine is out of the changer, make sure
the discs are clean, undamaged, and loaded correctly (see Owner’s Manual of the CD changer). You may also try activating
the Re-Set button cr on the unit, but this will also erase the time and pre-set memories.
If the suggested measures do not solve the problem, contact an approved warranty station near you for further assistance.
CD CHANGER ERROR CODE
-6-