Filter
Top Products
Attaching the Antenna with Reflector to the Base
1. Route the 6' Mini Coax Cable through the Base and screw it securely
to the Antenna
2. Slide the Antenna with Reflector onto the Base
3. Using a screw driver slightly tighten the 2 screws (see fig 7) to secure
the Antenna to the Base
Connecting the HDTVlp
1. Connect the Mini Coax Cable
that is attached to the Antenna
to the Power Injector labeled
"Antenna"
2. Connect the 2' Standard Coax
Cable from the Power Injector
labeled "TV" to your HDTV or
Set-top box
3. Connect the 6' Standard Coax
Cable from the Power Injector
labeled "Power" to the
AC Adapter
4. Plug in the AC Adapter to a
standard AC outlet
Attaching Rubber Feet to the Base
Remove the protective adhesive strip from the 4 rubber feet and apply
them to the bottom of the antenna base.
HDTVlp
4
Installation (continued)
Attaching the Reflector to the Antenna
1. Starting from the right side, slide the Clip that is attached to the Reflector
diagonally into the notch at the back of the Antenna. (see fig 4,5)
2. Once the Clip is pushed in, slide it to the side so that it forms a 90 degree
angle to the Antenna's edge (see fig 6)
3. Repeat steps 1 and 2 for all four Clips
HDTVlp
3
Fig. 5
Fig. 4
Fig. 6
Fig. 7
ANT
ENN
A
TV
POWER
ANT
ENN
A
TV
POW
ER
2 Coax
Cable
6 Coax
Cable
Fig. 8