Filter
Top Products
Installation
Attaching the Clips to the Reflector:
1. Lay the Reflector flat on a table
2. Grip the Reflector with your thumb and index finger and bend the
Reflector's top and bottom edges towards you (see fig 2,3)
3. With your other hand, grasp the Clip and attach it to the Reflector at the
two notches
4. Repeat steps 2 and 3 for all four Clips
HDTVlp
2
About Your TERK HDTVlp Antenna Pro
Thank you for choosing the TERK HDTVlp. TERK antennas are designed
to deliver sharp, clear, high definition signal reception. At TERK, our
engineering department is dedicated to designing antennas that enhance
both the latest technology and the aesthetics of any viewing environment.
The HDTVlp installs in minutes, is easy to use and simple to adjust. Before
using your antenna, please remove all parts from the box and read the
owner’s manual carefully.
HDTVlp
1
ANT
ENN
A
TV
POWER
1 - Antenna
2 - Reflector
3 - Antenna Base
4 - (4) Clips
5 - 6' Mini Coax Cable
6 - 2' Standard
Coax Cable
7 - Power Injector
8 - 6' Standard
Coax Cable
9 - AC Adapter
10 - (4) Rubber Feet
Fig. 1
Fig. 3
Fig. 2
Notch
Notch