Filter
Top Products
17
Roger Beep Tone
The Roger Beep is a tone which is automatically transmitted whenever the
PTT button is released . This tone alerts the receiving party that the
transmission has been terminated intentionally.
To enable and disable the Roger Beep tone:
- Press the Mode Button 6 times until ( r
) appears on the display with
the flashing Roger Beep icon ( ) and the on or oF indication.
- Press the Up or Down Button to select the tone on or off as desired.
- When enabled, the tone icon (
) appears steady on the display.
- Momentarily press the PTT Button to confirm selection.
Call Ringer Selection Mode
The transceiver provides 5 user-selectable call ringer melodies that alerts
other users that you want to communicate with them.
To select your favorite call ringer melody:
- From the GMRS standby mode, press the MODE button 7 times; CA
will appear on the display, together with a flashing number between 1
and 5, and ring will sound.
- Press the Up or Down Button to preview the 5 available call
melodies.
- Momentarily press the PTT button to confirm your selection.
Additional Functions
When the battery ( ) icon appear(s) flashing on the LCD panel, re-
charge unit or install new Audiovox approved rechargeable batteries. The
unit will also provide an audible warning of low battery voltage. If this icon
continues to flash on the LCD, please contact your authorized service
center. Prior to contacting your authorized service center, please check the
following:
1. Verify correct battery installation.
2. Install new Audiovox approved rechargeable batteries
3. Check that AC adapter is plugged into a working AC power outlet.