Filter
Top Products
16
To set the Dual Watch Mode:
- From the GMRS standby mode, press the MODE button 3 times; the
DW icon flashes on the display, together with the channel number
currently selected.
- To enable the dual watch mode, press the Up or Down button; the dual
watch channel number will flash and start to increment up or down as
the Up or Down button is pressed. The DW icon appears steady on the
display.
Dual Watch CTCSS Mode
- Press the MODE button again to enter the dual watch channel CTCSS
function and select the desired CTCSS code for the dual watch chan
nel previously entered.
- Press the SCAN button to confirm selection of the dual watch
channel. The display will now alternate between the primary
channel and the dual watch channel just selected. The DW icon
appears steady on the display.
Momentarily press the PTT button to exit the dual watch selection
mode.
Key Tone Selection Mode
This feature allows the transceiver to sound a tone whenever the following
keys are pressed: Monitor (L/MON) Button, CHANNEL Up/Down Buttons,
MODE Button, or SCAN Button.
To turn the key tones on or off:
- From the GMRS standby mode, press the MODE Button 5 times until
bp, the Bell (
) icon, and On or oF flash on the LCD display.
- Press the Up or Down Button to toggle the key tone feature On or Off.
- Momentarily press the PTT button to confirm your selection.
When the key tone feature is on, the Bell icon appears steady on the
display, and the beep tones sound in response to each button activation.