Filter
Top Products
bu EJECT BUTTON ( )
Tape playback is stopped and the cassette is ejected by pushing this button.
Radio, CD player or CD changer operation will automatically resume when the
cassette is ejected, depending on which mode was in operation prior to cassette
play.
cl DISC SLOT
With the label surface facing up, gently insert the disc into the slot until the soft-
loading mechanism engages and disc play begins. The rotating disc indicator
and track number will appear on the display panel.
NOTE: This unit is designed for play of standard 5" (12cm) Compact
Discs ONLY. Do not attempt to use 3" (8cm) CD-Single discs
in this unit, either with or without an adaptor, as damage to the
player and/or disc can occur. Such damage will not be covered
by the Warranty on this product.
cm TRACK SELECT ( TRACK )
This button is used to quickly select the beginning of a particular track. Tap the
Forward Track Select ( ) side of the button or Backward Track Select ( )
side of the button to locate the desired track as shown by the track number on
the display panel.
cn CUE/REVIEW FUNCTIONS ( / )
High-speed audible search to any section of the disc can be made by the Cue
and Reviewfunctions. Press and holdthe Cue( ) sideof the buttonto advance
rapidly in forward direction ( indication will flash on the display panel) or the
Review ( ) side of the button to advance rapidly in the backward direction
( indication will flash on the display panel).
When the Cue ( ) side of the button is held down and the end of the last track
on the disc is reached or the Review ( ) side of the button is held down until
the beginning of the first track is reached, the unit will automatically enter the
Play mode from the beginning of track #1.
co CD PLAYER PAUSE SELECTOR ( )
During disc play, press this button to temporarily stop play of the disc (the
indication will flash on the display panel). Press the button again to
resume play of the disc from the point at which it was stopped. Pause mode will
also be cancelled by activating any other disc function.
cp TRACKSCAN(SCAN)
During disc play, press this button to play the first 10 seconds of each track on
the disc (“SCAN” will appear on the display panel). When a desired track is
reached, press the Scan button again to cancel the function and play of the
selected track will continue. The Track Scan mode will also be cancelled by
activatingthe RepeatPlay cq ,Shuffle Play cr , orTrack Select cm functions.
-5-