Filter
Top Products
HIGH PERFORMANCE STEREO AMPLIFIER
This power amplifier has been designed to provide high quality performance with a
minimum of maintenance. However, it's performance will only be as good as the care
and quality of components with which it is installed. We therefore advise that you read
these instructions very carefully to familiarize yourself with the product and it's
features.
Should you require assistance with the installation or wiring of this unit, please call
our toll-free "HELP" line at 1-800-645-4994 during the days/hours shown.
Monday - Friday
Saturday
8:30am - 7:00pm Eastern
9:00am - 5:00pm Eastern
1-800-645-4994
HELP!
SPECIFICATIONS
-1-
* Due to continuing improvement, Audiovox reserves the right to change features and design without notice.
Maximum Output Power
4-Channel Operation: 125 watts x 4
2-Channel Operation: 500 watts x 2
Output Power @ 1% T.H.D.
4-Channel Operation: 600 watts RMS x 4
2-Channel Operation: 120 watts RMS x 2
Output Impedance: 2 - 8 ohms (stereo)
4 - 8 ohms (mono)
Frequency Response: 10 - 50,000 Hz. ± 1 dB
Channel Separation: 55 dB
Signal / Noise Ratio: 90 dB (A-Weighted)
Input Impedance: low-level 10K ohms
high-level 100 ohms
Input Sensitivity: low-level 200 mv. - 5 v.
high-level 2 - 10 v.
Supply Voltage: 12 volts, negative ground
Fuse Rating: 20 amps.
Dimensions (W x H x D): 9" x 2-1/4" x 10-5/8"
230 mm x 57 mm x 270 mm