Filter
Top Products
INSTALLATION INSTRUCTIONSINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONSINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
INSTALLATION DIAGRAMINSTALLATION DIAGRAM
INSTALLATION DIAGRAMINSTALLATION DIAGRAM
INSTALLATION DIAGRAM
1. Select a mounting area where the amplifier will
have sufficient air circulation for proper cooling.
Inadequate air circulation will cause the temperature
of the amplifier to rise and will trigger the
thermal protection mode.
2. Place the amplifier on the mounting surface
and mark the locations of the four mounting
holes as shown in the illustration.
3. Remove the amplifier and drill a 1/8" hole a t
each of the four locations.
CAUTION:CAUTION:
CAUTION:CAUTION:
CAUTION: Before drilling the holes, look at the
underside of the mounting surface. Always
check carefully to avoid drilling into wiring,
braces, fuel or brake lines.
CHECK BEFORECHECK BEFORE
CHECK BEFORECHECK BEFORE
CHECK BEFORE
YOU DRILL !YOU DRILL !
YOU DRILL !YOU DRILL !
YOU DRILL !
4. Secure the amplifier to the mounting surface
using the self-tapping screws provided.
128-5721128-5721
128-5721128-5721
128-5721
SHT. 5 OF 12SHT. 5 OF 12
SHT. 5 OF 12SHT. 5 OF 12
SHT. 5 OF 12
-3-
MOUNTING SURFACE
1/8" DIA.HOLE
SELF-TAPPING SCREW