Filter
Top Products
A34XP & A46XP
7
Wiring (continued)
Speaker Wiring
The Speaker Wiring diagrams illustrate the following four options for connecting speakers and
subwoofers to the AXP amps:
• 2 Speakers
• 2 Subwoofers
• Bridged Subwoofer
• Tri-Mode
Note: When running a subwoofer and two full-range speakers together (tri-mode
operation), high and low pass filters must be used. Failure to install these filters may
cause damage to the amplifier and/or the speakers.
Frequency
Hz.
Speaker Impedance
2 Ohms 4 Ohms 8 Ohms
LCLCLC
80 4.1mH 1000FF 8.2mH 500FF 15mH 250FF
100 3.1mH 800FF 6.2mH 400FF 12mH 200FF
130 2.4mH 600FF 4.7mH 300FF 10mH 150FF
200 1.6mH 400FF 3.3mH 200FF 6.8mH 100FF
250 1.2mH 300FF 2.4mH 150FF4.7mH 75FF
400 0.8mH 200FF 1.6mH 100FF3.3mH 50FF
600 0.5mH 136FF1.0mH 68FF2.0mH33FF
800 0.41mH 100FF 0.82mH 50FF1.6mH26FF
1000 0.31mH 78FF 0.62mH 39FF1.2mH20FF
1200 0.25mH 66FF 0.51mH 33FF1.0mH16FF
1800 0.16mH 44FF 0.33mH 22FF0.68mH10FF
4000 0.08mH 22FF 0.16mH 10FF0.33mH 5FF
2 Speakers
2 Autoparlantes
2 Haut-Parleurs
2 Subwoofers
2 Autoparlantes de Sonido Graves
2 Subwoofers
Bridged Subwoofer
Sonidosbajos en Puente
Subwoofer En Pont
Tri-Mode
Tri-Modo
Tri-Mode