AT&T TL7610 Headphones User Manual


 
47
Maintenance and Troubleshooting
The ON/OFF
light on the
headset is off
while charging.
Make sure the power and line cords are
plugged in correctly and securely.
Make sure that the battery connector is
securely plugged into the cordless headset.
Push the headset downwards in the headset
base charging cradle until the ON/OFF light
on the headset turns on.
• Unplug the unit’s electrical power. Wait for
15 seconds, then plug it back in. Allow up
to one minute for the cordless headset and
headset base to reset.
Clean the cordless headset and headset
base charging contacts each month using a
pencil eraser or cloth.
• Your headset or headset base might be
malfunctioning. Please refer to the Limited
warranty section on page 59 for further
instructions.
Troubleshooting