Filter
Top Products
41
Maintenance and Troubleshooting
I want to use my
headset with a
different headset
base.
• You need to de-register (see page 34) the
headset from the current headset base and
then register (see page 33) it to the new
headset base.
My cordless
headset isn’t
performing
normally.
• Make sure the power cord is securely
plugged into the headset base. Plug the unit
into a different working electrical outlet not
controlled by a wall switch.
• Move the cordless headset closer to the
headset base. You might have moved out of
range.
• Reset the headset base. Unplug the unit’s
electrical power. Wait for 15 seconds, then
plug it back in. Allow up to one minute for
the cordless headset and headset base to
reset.
• Other electronic products can cause
interference to your cordless headset.
Try installing your headset as far away
from these types of electronic devices
as possible: television sets, VCRs, or other
cordless telephones.
Troubleshooting