Atlas Sound PA1001G Stereo Amplifier User Manual


  Open as PDF
of 15
 
– 13 – AtlasSound.com
Specifications are subject to change without notice.
Owner’s Manual PA1001G Power Amplifier
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
SPECIFICATIONS
OUTPUT POWER
100 Watts @ 70v into 50Ω load, 100w @ 100v into 100Ω load
RMS 1% THD
TOTAL HARMONIC DISTORTION
0.2%
FREQUENCY RESPONSE
+/-3dB30Hz-20KHzNoHi-PassFilter
+/-3dB100Hz-20KHzHi-Passengaged
PROTECTION CIRCUITS
AC fuse (T1.6A 250v 5mm x 20mm), Thermal, short circuit
SIGNAL TO NOISE RATIO
-100dBbelowratedoutput(A-weighted)
INPUT SENSITIVITY
RCAUnbalancedSummed50mV-320mVadjustable
Balanced320mv
INPUT IMPEDANCE
RCA Unbalanced10k
Balanced20k
AUDIO TURN ON TRIGGER
1mv – 20mv
AC TURN ON TRIGGER
100mA
POWER REQUIREMENT
120VAC,60Hz
POWER CONSUMPTION
10w Sleep Mode, 16w Active idle model, 165 full load 70v
DIMENSIONS
8.5” x 1 3/4” x 13.5” (216mm x 45mm x 343mm)
WEIGHT
4.9lbs (2.4Kg) Unit
 previous next