Filter
Top Products
TRIM RING - Model FA-TR4
The Strategy Series FA-TR4 trim ring/rough-in bracket, for wall or ceiling-mount applications,
installs prior to the drywall and serves as a pattern cut-out for the drywall contractor to finish-
out the wall leaving the proper opening for a FA97-4 or FA95-4 enclosure and also a FAPR-4
Plaster Ring. This step identifies pre-wire location, expediting sound system installation. Trim
ring measures 25
5
⁄8"L and will accommodate
3
⁄8" to 1
1
⁄4" drywall. Mounting holes are provided to
match both 16" and 24" center studs. FA-TR4 is finished in black epoxy.
NET WEIGHT
MODEL A B C LBS / KGS
FA-TR4 25
5
⁄8”6
5
⁄8”11
1
⁄4” 1.5 lbs
(651mm) (166mm) (285mm) (.7 kgs)
Specifications subject to change without notice
© 2001 Atlas Sound LP Printed in U.S.A. 000501 SL1-1512
1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A. / TELEPHONE: (800) 876-3333 / FAX (800) 765-3435
PLASTER RING - Model FAPR-4
Model FAPR-4 plaster ring is used to mount Strategy Series 4" loudspeakers into ceilings and
walls for applications where an enclosure cannot be used, or where it is not desired. Unit is
constructed with the same internal mounting flange as FA97-4 and FA95-4 enclosures. It may
be used to mount non-transformer equipped loudspeaker models into walls having a min. depth
of 2
7
⁄16". The FAPR-4 will facilitate installation of transformer-equipped loudspeaker models into
walls with a minimum depth of 4
3
⁄8" *. Plaster ring is constructed of 20-gauge CRS and finished
in textured black epoxy. It is equipped with four threaded inserts for loudspeaker installation
and three stud receptacles for mounting Strategy Series grilles. The mounting mechanism is
comprised of three rotating clamps (included).
*Measured from the front of the mounting surface to the rear of the inside mounting area.
CUTOUT NET WEIGHT
MODEL A B C DIA. LBS / KGS
FAPR-4 5
3
⁄8"7
9
⁄16"
7
⁄8"6
1
⁄2" .5 lbs
(137mm) (192mm) (22mm) (165mm) (227g)
MODEL A B C NET WEIGHT LBS/KGS
FA81-4 14
1
⁄8"23
5
⁄8"6
1
⁄2" 2.38 lbs
(359mm) (600mm) (163mm) 1.1kgs
MOUNTING ACCESSORIES
TILE BRIDGE - Model FA81-4
The Strategy Series™ tile bridge for 4" loudspeakers is designed to prevent ceiling tile sag by
distributing the loudspeaker assembly weight to the ceiling’s support members. Model FA81-4
accepts enclosure Model Series FA95-4 and FA97-4, Plaster Ring Model FAPR-4 and is
constructed of 24-gauge electro-galvanized steel.
FA81-4
FAPR-4
FA-TR4
• • • • • •
• • • • • •
•
• •
A
C
A
B
•
• •
• • • • • •
• • • • • •