Filter
Top Products
Instruction Manual
7
Specifications
Specifications
Model AW-424
Type 2-way with Sealed Indoor/Outdoor Speaker
Drivers Woofer (2) 4 ½” (115mm) GLH
Tweeter (1) 1” (25mm) soft dome
Frequency Response 70Hz – 20kHz ±3dB
Nominal Impedance 8 ohms
Crossover Frequency 3.5kHz, 3rd order
Sensitivity 88dB
Recommended Amplifier Power 10 – 150 Watts RMS
Dimensions w/grille (W x H x D) 6.875 x 12.5 x 6.5” 175 x 320 x 166mm
Weight (ea) 12lbs; 5.5kg
IMPORTANT NOTE: The power recommendation for these speaker systems assumes that you
will not operate your amplifier/receiver in a way that produces distortion. Even rugged speak-
ers like ours can be damaged by an amplifier driven into audible distortion. The harsh amplifier
distortion (“clipping”) that occurs in this situation will eventually cause damage to the speaker
system. This type of damage may be cumulative and can build up over time, as the amplifier is
driven into overload again and again. Such damage is easily identifiable through examination
of the damaged speaker’s voice coil and is not covered by the warranty.
Specifications are those in effect at the time of printing. As part of our ongoing program of
continuous product improvement, Atlantic Technology reserves the right to change specifica
-
tions or appearance at any time without notice.