Atlantic Technology AW-424 Speaker System User Manual


 
4
AW-424 Indoor/Outdoor Speaker System
Mounting
Mounting Your Speakers
Use the supplied mounting brackets to mount the speakers vertically or hor-
izontally on exteriors house walls, deck corner posts, or other secure surface.
The bracket has holes to facilitate a variety of mounting hardware.
Always consult a knowledgeable installer regarding the best hardware
to use on your mounting surface.
To mount the speaker, loosen the knobs and remove the bracket from the
speaker. If you are running speaker wires, you may route the wires through
the large hole in the middle of the bracket; the bracket will then cover the
wire hole in the wall.
Mount the bracket in its desired location.
Reattach the knobs to the speaker and tighten them partially down. Slide the
speaker/knob assembly into the mounting channels in the bracket until the
speaker “seats” in the final position. Adjust the speaker to the desired angle
and tighten the knobs to secure the speaker in place. (See below)
You may also use mounting brackets made by other companies, if you
choose. The ¼-20 threaded inserts for the knob posts are the exact same
thread used by many manufacturers for their various mounting devices.