Filter
Top Products
3. Press ENTER to continue the active flight plan.
Waypoint sequencing will be enabled.
*Active* 259nm
Dest: Wpt: PDT
Active ·
Load Approach (GX50/60 Only)
This option is available for the Active flight plan
when a datacard with approach information is
inserted into the GX50/60. Press
ENTER to show the
available approaches for the destination airport. Press
SEL while in the Nav or Map functions to go directly
to this option.
*Active* 56.1nm
Dest Wpt: PDX
Load Approach?
Change Approach (GX50/60 Only)
This option is available on the Flight Plan home page
when an approach is already loaded. Press
ENTER to
select a new approach for the current destination
airport.
*Active* 56.1nm
Dest Wpt: PDX
Change Approach?
Unload Approach (GX50/60 Only)
This option is available on the Flight Plan home page
when an approach is already loaded. Press
ENTER to
unload the approach from the active flight plan. The
approach waypoints will be replaced by the
destination waypoint.
*Active* 56.1nm
Dest Wpt: PDX
Unload Approach?
6-22
Flight Plan Functions
ENTER