Antex electronic SX-33 Stereo System User Manual


 
40
NEW Z1/Z1E/SX-3/SX-33/SX-33E SAMPLE RATES
The Z1/Z1e boards marked 9000-2319-300x and SX-3/SX-33/SX-
33e 9000-2334-300x boards now support 8 new sample rates
which provide greater compatibility with industry standards. The
sample rates currently supported are listed below - the new sam-
ple rates are in boldface:
48kHz, 44.1kHz, 37.8kHz, 32kHz, 29.4kHz, 25.2kHz, 24kHz,
22.05kHz, 19.2kHz, 18.9kHz, 17.64kHz, 16kHz, 15.12kHz,
14.7kHz, 12.6kHz, 12kHz, 11.025kHz, 9.6kHz, 9.45kHz,
8.82kHz, 8kHz, 7.56kHz, 7.35kHz, 6.3kHz
NOTE: Because of the sample rate changes, the following sample
rates are no longer available on the current Z1/SX-3:
50kHz, 33.3kHz, 25kHz, 20kHz, 16.7kHz, 12.5kHz, 10kHz,
8.33kHz
WINDOWS NT & Z1E SCSI IRQ JUMPER
If you are connecting a SCSI CD-ROM to a Z1e board (marked
F2319-4 Rev A or B) under Windows NT, use Windows NT driver
V0.8e or later. In addition, DO NOT CONNECT the SCSI IRQx
jumper as described on pg. 8. Leave the SCSI IRQx jumper
open.