Filter
Top Products
Recalling a Setup
The following procedure recalls a setup from memory.
Step 1. Press the
RECALL SETUP key.
Step 2. Select the desired setup using the Up/Down arrow key.
Step 3. Press
ENTER to recall the setup.
Save and Recall a Display
Saving a Display
The following procedure saves a display to memory.
Step 1. Press the
SAVE DISPLAY key to activate the alphanumeric menu for trace stor
-
age.
Step 2. Use the soft keys to enter a label for the saved trace.
For example, to save a display with the name “TX1 RETURN LOSS” press the
soft key group that contains the letter “T” then press the “T” soft key. Press the
soft key group that contains the letter “X” then press the “X” soft key. Press the
number “1” key on the numeric keypad. Use the softkeys and keypad as neces-
sary to enter the entire name, then press
ENTER to complete the process.
NOTE: More than one trace can be saved using the same alphanumeric name,
as traces are stored chronologically, using the time/date stamp.
Recalling a Display
The following procedure recalls a previously saved display from memory.
Step 1. Press the
RECALL DISPLAY key.
Step 2. Select the desired display using the Up/Down arrow key.
Step 3. Press
ENTER to recall the display.
3-8
Chapter 3 Getting Started