Filter
Top Products
Tango Amplifiers
1
T
ango Amplifiers
Tango Amplifiers
Overview
Where more than one pair of speakers is required in Tango Distributed Audio zones, the Tango Amplifier
(FIG. 1) provides the extra power needed to drive up to 12 additional speaker pairs or 24 channels per zone.
Use Tango Amplifiers in backyards, large rooms or other zones where additional speakers are needed.
High-quality sound - delivers 60 watts of high-quality sound per channel.
Includes an 8-channel amp that supports 4 speakers pairs or a 4-channel amp that supports 2
speaker pairs.
Expandable configuration - stack up to three Tango Amplifiers units per zone to gain up to 12
additional speaker pairs (24 channels).
Easy installation - speaker wire technology makes installation simple using four conductor speaker
wire.
Integrates with Tango Series, Delta Series and Mi Series controllers, as well as the W, C, C-DT and
EL Series speakers.
The DAS-TAMP4-SIG Tango 4-Channel Amplifier (FG1103-21) is a 4-channel amp that supports an
additional 2 speaker pairs per unit.
The DAS-TAMP8-SIG Tango 8-Channel Amplifier (FG1103-22) is an 8-channel amp that supports an
additional 4 speakers pairs per unit.
Product Specifications
FIG. 1 Tango Amplifiers
Tango Amplifiers - Product Specifications
Models Available: • DAS-TAMP4-SIG (FG1103-21) 4-Channel Amplifier (120 V)
• DAS-TAMP8-SIG (FG1103-22) 8-Channel Amplifier (120 V)
Configuration: • Modular Design - configurable in single pairs up to 4 stereo pairs (8
channels).
• Stackable up to 3 Tango Amplifiers or 12 stereo pairs (24 channels)
Stereo Output: • Dual mono amplifier stage design
• 60 watts per channel
• THD+N at 1 Khz continuous .006%@ 8 Ohms
• Each Tango amplifier is capable of providing 480 watts @ 8 Ohms
Control Options: • Metreau (DAS-MET-6SRC, DAS-MET-NUM) keypads
• C-Series speakers using SWT
Power: • 750W max (Average usage = 250W).
• High current Torroidal power supply